USB Configure
The default configuration is [Enabled].
PET Progress
The default configuration is [Enabled].
AMT CIRA Timeout
The value is set as 0 by default and cannot be modified.
Watchdog
The default configuration is [Disabled]. Users can enable this function if
required. The OS timer and BIOS timer are only effective when the Watchdog
function is enabled.
5.2.2.9
USB Configuration
Legacy USB Support
The default configuration is [Enabled].
XHCI Hand-Off
The default configuration is [Enabled].
EHCI Hand-Off]
The default configuration is [Disabled].
USB Mass Storage Driver Support
The default configuration is [Enabled].
USB Transfer Timeout
The default value for this parameter is [20 seconds]. The options are 1 sec, 5
sec, 10 sec, and 20 sec.
Device Reset Timeout
The default value for this parameter is [20 seconds]. The options are 10 sec, 20
sec, 30 sec, and 40 sec.
Device Power-Up Delay
The default configuration is [Auto]. Users can select between [Auto] and [Man-
ual].
41
IPPC-6152A/6172A/6192A User Manual