3.1
Jumper Settings
This chapter explains how to set jumpers and configure the IPPC-6152A/6172A/
6192A panel PC.
A jumper is the simplest type of electric switch. It consists of two metal pins and a
small metal cap (often protected by a plastic cover) that slides over the pins to con-
nect them. To "close" a jumper, simply connect the pins with the cap. To "open" a
jumper, simply remove the cap. Occasionally, a jumper will have three pins labeled 1,
2, and 3. For these types of jumpers, connect either pins 1 and 2 or pins 2 and 3.
The jumper settings are schematically depicted in this manual as follows:
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any concerns about the optimum hardware configuration for your application, contact
your local distributor or sales representative before making any changes. Generally,
only a standard cable is required to make most connections.
3.1.1
Jumpers and Switches
The IPPC-6152A/6172A/6192A motherboard features a number of jumpers that
allow the system to be configured according to specific applications.
IPPC-6152A/6172A/6192A User Manual
Open
Closed
Open
Closed
Closed 2-3
Closed 2-3
24