Snmp-Server; Snmp-Server Access - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

Default:
None
Usage Guide:
To configure the SFP temperature-threshold of sFlow
Example:
To configure the SFP temperature-threshold (55 degrees C) of sFlow
Switch# configure terminal
Switch (config)# sfp temperature-threshold 55

4.2.157 snmp-server

Command:
snmp-server
snmp-server
Set SNMP server's configurations
Default:
Enabled
Usage Guide:
To enable the SNMP Service
Example:
To enable the SNMP Service
Switch# configure terminal
Switch (config)# snmp-server

4.2.158 snmp-server access

Command:
snmp-server access <group_name> model { v1 | v2c | v3 | any } level { auth | noauth |
priv } [ read <view_name> ] [ write <write_name> ]
snmp-server
Set SNMP server's configurations
access
access configuration
<GroupName : word32>
model
security model
group name
-251-
Command Guide of WGSW-48040HP

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents