Planet Networking & Communication WGSW-48040HP Command Manual page 351

Command:
show ptp <clockinst> { default | current | parent | time-property | filter | servo | clk |
ho | uni | master-table-unicast | slave | { { port-state | port-ds | wireless |
foreign-master-record } [ interface ( <port_type> [ <port_type_list> ] ) ] } }
show Show running system information
ptp Precision time Protocol (1588)
<Clockinst : 0-3>
clk Show PTP slave clock options parameters.
current Show PTP current data set (IEEE1588 paragraph 8.2.2).
default Show PTP default data set (IEEE1588 paragraph 8.2.1).
filter Show PTP filter parameters.
foreign-master-record
ho Show PTP slave holdover parameters.
interface Search by port
master-table-unicast
parent Show PTP parent data set (IEEE1588 paragraph 8.2.3).
port-ds Show PTP port data set (IEEE1588 paragraph 8.2.5).
port-state Show PTP port state.
servo Show PTP servo parameters.
slave Show PTP slave clock lock threshold parameters.
time-property Show PTP time properties data set (IEEE1588
uni Show PTP slave unicast configuration parameters.
wireless Show PTP port wireless parameters.
Default:
N/A
Usage Guide:
To display the PTP information.
Example:
To display the PTP default information for PTP instance 0.
Switch # show ptp 0 default
ClockId DeviceType 2StepFlag Ports ClockIdentity
------- ----------
0 Ord-Bound
ClockQuality
-------------------------
Cl:251 Ac:Unknwn Va:65535 128
Protocol One-Way
Show various PTP data
Show PTP port foreign masters.
Show PTP master list of connected unicast slaves.
--------- ----- -----------------------
True 29
Pri1 Pri2
---- ----
128
VLAN Tag Enable
Command Guide of WGSW-48040HP
00:01:c1:ff:fe:00:99:00 0
VID PCP
-351-
paragraph 8.2.4).
Dom
---