Access-List Policy; Access-List Port-State - Planet Networking & Communication WGSW-48040HP Command Manual

Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list logging

4.2.45.4 access-list policy

Command:
access-list policy <PolicyId : 0-255>
policy Policy
<PolicyId : 0-255>
Default:
Policy ID: 0
Usage Guide:
To configure Policy ID for the ACL.
Example:
To configure ACL Policy ID 1 for the GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # access-list policy 1

4.2.45.5 access-list port-state

Command:
access-list port-state
port-state Re-enable shutdown port that was shutdown by access-list module
Default:
Enable
Usage Guide:
To enable Port-state function for the ACL.
Example:
To configure ACL Port-state function for the GigabitEthernet X/X.
Switch# configure terminal
Policy ID
Command Guide of WGSW-48040HP
-71-