Ip Igmp Snooping Robustness-Variable; Ip Igmp Snooping Unsolicited-Report-Interval - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

Default:
125
Usage Guide:
To configure Querier-interval of IGMP snooping for specific VLAN
Example:
To configure Querier-interval (60 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping query-max-response-time 600

4.2.46.16 ip igmp snooping robustness-variable

Command:
ip igmp snooping robustness-variable <IpmcRv : 1-255>
ip
Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
robustness-variable
<IpmcRv : 1-255>
Default:
2
Usage Guide:
To configure Robustness Variable of IGMP snooping for specific VLAN
Example:
To configure Robustness Variable (88) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping robustness-variable 88

4.2.46.17 ip igmp snooping unsolicited-report-interval

Command:
Robustness Variable
Packet loss tolerance count from 1 to 255
Command Guide of WGSW-48040HP
-151-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents