Show Ntp Status; Show Platform Phy - Planet Networking & Communication WGSW-48040HP Command Manual

LOL: FALSE
DHOLD: TRUE
SSM State is:
Interface
GigabitEthernet 1/1

4.20.68 show ntp status

Command:
show ntp status
show Show running system information
ntp Configure NTP
status status
Default:
N/A
Usage Guide:
To display the NTP Server information.
Example:
To display the NTP Server information.
Switch # show ntp status
NTP Mode : enabled
Idx Server IP host address (a.b.c.d) or a host name string
--- ------------------------------------------------------
1 192.168.0.44
2
3
4
5

4.20.69 show platform phy

Command:
show platform phy [ interface ( <port_type> [ <port_type_list> ] ) ]
Tx SSM Rx SSM Mode
QL_NONE QL_LINK Master
-346-
Command Guide of WGSW-48040HP