Ipv6 Mld Snooping Last-Member-Query-Interval; Ipv6 Mld Snooping Priority - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping compatibility v2

4.2.46.21 ipv6 mld snooping last-member-query-interval

Command:
ipv6 mld snooping last-member-query-interval <IpmcLmqi : 0-31744>
ipv6
IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
last-member-query-interval
<IpmcLmqi : 0-31744>
Default:
10
Usage Guide:
To configure Last-member-query-interval of MLD snooping for specific VLAN
Example:
To configure Last-member-query-interval (100 seconds) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping last-member-query-interval 1000

4.2.46.22 ipv6 mld snooping priority

Command:
ipv6 mld snooping priority <CosPriority : 0-7>
ipv6
IPv6 configuration commands
mld
Multicast Listener Discovery
snooping
Snooping MLD
priority
Interface CoS priority
<CosPriority : 0-7>
Default:
Last Member Query Interval in tenths of seconds
0 - 31744 tenths of seconds
CoS priority ranges from 0 to 7
Command Guide of WGSW-48040HP
-154-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents