Show Logging; Show Loop-Protect - Planet Networking & Communication WGSW-48040HP Command Manual

4.20.62 show logging

Command:
show logging {<log_id> | error | info | warning } [ switch <switch_list> ]
show Show running system information
logging Syslog
<logging_id: 1-4294967295>
switch Switch
<switch_list> Switch ID list in 1
Default:
N/A
Usage Guide:
To display the Syslog information.
Example:
To display the Syslog information with Log ID 235861.
Switch # show logging 235861
Switch : 1
ID : 235861
Level : Warning
Time : 1970-01-01T13:33:57+00:00
Message:
Loop Detected: Port 5 shut down

4.20.63 show loop-protect

Command:
show loop-protect [ interface ( <port_type> [ <port_list> ] ) ]
show Show running system information
loop-protect Loop protection configuration
interface Interface status and configuration
Default:
N/A
Usage Guide:
To display the Loop protection information.
Logging ID
-341-
Command Guide of WGSW-48040HP