Hardware-Address; Host - Planet Networking & Communication WGSW-48040HP Command Manual

Switch (config-dhcp-pool)# exit
Switch (config)#

4.2.53.11 hardware-address

Command:
hardware-address <MAC>
hardware-address
<MAC> Client MAC address
Default:
None
Usage Guide:
To configure MAC address of DHCP Server while the pool is in the host type.
Example:
To configure MAC address (00:11:22:33:44:55) of DHCP Server for pool "planetbestswitch" while the pool is in the host
type.
Switch# configure terminal
Switch (config)# ip dhcp pool planetbestswitch
Switch (config-dhcp-pool)# hardware-address 00:11:22:33:44:55

4.2.53.12 host

Command:
host <IP: A.B.C.D> <Subnet: A.B.C.D>
host Client IP address and mask
<IP: A.B.C.D> Network number
<Subnet: A.B.C.D>
Default:
None
Usage Guide:
To configure Host IP address of DHCP Server.
Example:
To configure Host IP address (192.168.1.10/24) of DHCP Server for pool "planetbestswitch".
Client hardware address
Network mask in dotted-decimal notation, excluding 255.255.255.255
Command Guide of WGSW-48040HP
-168-