Ip Dhcp Server; Ip Igmp Snooping - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

Switch (config)# interface vlan X
Switch (config-if-vlan)# ip address dhcp fallback 192.168.1.10 255.255.255.0

4.2.46.7 ip dhcp server

Command:
ip dhcp server
ip
Interface Internet Protocol config commands
dhcp
Configure DHCP server parameters
server
Enable DHCP server per VLAN
Default:
None
Usage Guide:
To enable IPv4 DHCP Server for specific VLAN
Example:
To enable IPv4 DHCP Server for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip dhcp server

4.2.46.8 ip igmp snooping

Command:
ip igmp snooping
ip
Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
Default:
Disabled
Usage Guide:
To enable IGMP snooping for specific VLAN
Example:
To enable IGMP snooping for VLAN X
Command Guide of WGSW-48040HP
-146-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Table of Contents