Qos Dpl; Qos Dscp-Classify - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

Usage Guide:
To configure DEI of QoS for specific interface
Example:
To configure DEI (1) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dei 1

4.2.45.86 qos dpl

Command:
qos dpl <Dei : 0-1>
qos
Quality of Service
dpl
Drop precedence level configuration
<Dpl : dpl>
Specific drop precedence level
Default:
0
Usage Guide:
To configure DPL of QoS for specific interface
Example:
To configure DPL (1) of QoS for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # qos dpl 1

4.2.45.87 qos dscp-classify

Command:
qos dscp-classify any | selected | zero
qos
Quality of Service
dscp-classify
DSCP ingress classification
any
Classify to new DSCP always
selected
Classify to new DSCP if classify is enabled for specific DSCP value in global dscp-classify map
Command Guide of WGSW-48040HP
-114-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Table of Contents