Ipv6 Address - Planet Networking & Communication WGSW-48040HP Command Manual

L2+ 48-port 10/100/1000t 802.3at poe + 4-port shared 100/1000x sfp managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for WGSW-48040HP:
Table of Contents

Advertisement

ip igmp snooping unsolicited-report-interval <IpmcUri : 0-31744>
ip
Interface Internet Protocol config commands
igmp
Internet Group Management Protocol
snooping
Snooping IGMP
robustness-variable
<IpmcUri : 0-31744>
Default:
1
Usage Guide:
To configure Unsolicited-Report-Interval of IGMP snooping for specific VLAN
Example:
To configure Unsolicited-Report-Interval (99 seconds) of IGMP snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ip igmp snooping unsolicited-report-interval 99

4.2.46.18 ipv6 address

Command:
Ipv6 address X:X:X:X::X/<0-128>
ipv6
IPv6 configuration commands
address
Configure the IPv6 address of an interface
X:X:X:X::X/<0-128>
Default:
None
Usage Guide:
To configure IPv6 address for specific VLAN
Example:
To configure IPv6 address (2001::7788/64) for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 address 2001::7788/64
Robustness Variable
0 - 31744 seconds
IPv6 prefix x:x::y/z
Command Guide of WGSW-48040HP
-152-

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WGSW-48040HP and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents