Spanning-Tree Mst <Instance> Cost; Spanning-Tree Mst <Instance> Port-Priority - Planet Networking & Communication WGSW-48040HP Command Manual

Switch (config-snmps-host)# spanning-tree link-type shared
4.2.163.9 spanning-tree mst <instance> cost
Command:
spanning-tree mst <instance> cost { <cost> | auto }
spanning-tree Spanning Tree protocol
mst STP bridge instance
<Instance : 0-7>
cost STP Cost of this port
<Cost : 1-200000000>
auto Use auto cost
Default:
Auto
Usage Guide:
To configure the Path Cost of MSTI Port
Example:
To configure the Path Cost (321) of MSTI Port (MST 2)
Switch# configure terminal
Switch (config)# snmp-server host planet
Switch (config-snmps-host)# spanning-tree mst 2 cost 321
4.2.163.10 spanning-tree mst <instance> port-priority
Command:
spanning-tree mst <instance> port-priority <prio>
spanning-tree Spanning Tree protocol
mst STP bridge instance
<Instance : 0-7>
port-priority STP priority of this port
<Prio : 0-240> Range (lower higher priority)
Default:
Auto
instance 0-7 (CIST=0, MST1=1...)
Cost range
instance 0-7 (CIST=0, MST1=1...)
Command Guide of WGSW-48040HP
-265-