4.2.175.2 end
Command:
end
end
Go back to EXEC mode
Default:
Auto
Usage Guide:
To back to EXEC mode
Example:
To back to EXEC mode
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)#end
Switch#
4.2.175.3 exit
Command:
exit
exit
Exit from current mode
Default:
None
Usage Guide:
To exit current mode
Example:
To exit current mode
Switch# configure terminal
Switch (config)# vlan 5
Switch (config-vlan)# exit
Switch (config)#
Command Guide of WGSW-48040HP
-275-
Need help?
Do you have a question about the WGSW-48040HP and is the answer not in the manual?