Dot1X Radius-Vlan; Dot1X Re-Authenticate - Planet Networking & Communication WGSW-48040HP Command Manual

4.2.45.15 dot1x radius-vlan

Command:
dot1x radius-vlan
dot1x
radius-vlan
Default:
Disable
Usage Guide:
To enable RADIUS-assigned VLAN for 802.1X
Example:
To enable RADIUS-assigned VLAN for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # dot1x radius-vlan

4.2.45.16 dot1x re-authenticate

Command:
dot1x re-authenticate
dot1x
re-authenticate Refresh (restart) 802.1X authentication process.
Default:
N/A
Usage Guide:
To restart 802.1X authentication process.
Example:
To restart 802.1X authentication process for GigabitEthernet X/X.
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # dot1x re-authenticate
IEEE Standard for port-based Network Access Control
Enables/disables per-port state of RADIUS-assigned VLAN.
IEEE Standard for port-based Network Access Control
Command Guide of WGSW-48040HP
-77-