4.2.10 (9) Current-Only Measurement (Dual-Phase)
Note
EPM6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
CHAPTER 4: ELECTRICAL INSTALLATIONELECTRICAL CONNECTION DIAGRAMS
For this wiring type, select
FIGURE 4–13: Current-Only Measurement (Dual-Phase)
Even if the meter is used only for current measurement, the unit requires a AN volts
reference. Please ensure that the voltage input is attached to the meter. AC control power
can be used to provide the reference signal.
(3 Element Wye) in the meter programming setup.
3 EL WYE
4–15