Checking Safety Mechanisms; Checking The Door Opening Safety Device - GIRBAU ED Series Operating And Maintenance Instruction Manual

11.3. Checking safety mechanisms

11.3.1. Checking the door opening safety device

CAUTION!
THIS SHOULD BE CARRIED OUT BY QUALIFIED PERSONNEL ONLY.
CHECK THE DOOR SAFETY DEVICE DAILY.
TAKE GREAT CARE WHEN CHECKING THE DOOR LOCK.
IF THERE IS A FAULT IN THE DOOR LOCK, KEEP HANDS WELL AWAY FROM THE DRYER LOADING
ORIFICE.
Checking procedure:
 With the machine power supply on, open the door of the dryer. The display reports that the door is open
and no program can be started.
 Close the door.
Select and run a drying program containing heating.

 When the display shows that the heating system is on, open the door of the dryer.
 The open door image appears on the display.
 Close the door. The display shows a message allowing the program to be resumed or cancelled.
 Cancel the program and open the door.
DANGER!
IF A FUNCTION IS DETECTED THAT IS DIFFERENT FROM THAT DESCRIBED IN THIS SECTION,
DISCONNECT ALL THE MACHINE'S SUPPLY LINES AND CONTACT THE AUTHORISED TECHNICAL
SERVICE.
NEVER USE THE MACHINE WITH A FAULTY DOOR SAFETY DEVICE.
Maintenance
52
Code no. 576074
Rev. nº 03/0418