Configuration Menu; Settings; General Settings; Temperature Unit - GIRBAU ED Series Operating And Maintenance Instruction Manual

7. CONFIGURATION MENU

The CONFIGURATION menu contains many settings that allow the operation of the dryer to be adapted to the
specific needs of each user.
Details of the CONFIGURATION menu

7.1. Settings

7.1.1. General settings

Language: Permits selecting the language of all the written messages.
Programmable values
Factory settings
Default value
Temperature unit: Permits selecting the unit that the temperature values are displayed in.
Programmable values
Factory settings
Default value
Beep when pressing a key: An acoustic warning that the dryer emits when a key is pressed.
Programmable values
Default value
Screen contrast: Permits modifying the contrast on the dryer screen.
Programmable range
Default value
Blink on end Shows end of cycle screen flashing.
Programmable values
Default value
Maximum lint filter cleaning time: This allows the user to set a number of hours after which, if the filter
door has not been opened, the dryer will display a filter cleaning reminder.
Programmable range
reminder
Default value
Machine ID: This parameter assigns a network identifier to the dryer. This identifier enables the
communication of the dryer with the environment through a system based on RS-485 protocol.
Programmable range
Default value
Configuration
: ESP (Spanish) | ENG (English) | FRA (French), ITA (Italian),
DE (German), CAT (Catalan).
: depending on specification.
: English
: C (degrees Celsius)
: depending on specification.
: degrees Celcius.
: YES / NO
: YES
: 0 (less contrast) ... 9 (more contrast)
: 4
: YES / NO
: YES
: from 0 to 48 hours. Programming 0: deactivates the cleaning
: 2
: 0 (disabled communications) ... 1-99 (enabled communications)
: 0
| F (degrees Fahrenheit)
36
Code no. 576074
Rev. nº 03/0418