Selecting And Starting A Program; Program Groupings; Order That The Programs Are Displayed On The Screen - GIRBAU ED Series Operating And Maintenance Instruction Manual

4.3. Selecting and starting a program

Select the RUNNING PROGRAMS menu on the main screen.

4.3.1. Program groupings

The dryer has 50 programs grouped into three types:
 Programs that can be programmed by the user: Programs that are empty of content, where programs can
be created and stored. (Maximum number of programs that can be programmed: 40.
 Preset programs: Ten preset programs with different drying cycles. Only their names can be changed, not
their content.
 Manual program. A program that allows the user to program a drying cycle for a single use only, and which
is NOT stored in the dryer's memory. Its appearance on the program list is optional and can be selected in
the OPTIONS menu from the Tools menu (see Section 7.1.2).

4.3.2. Order that the programs are displayed on the screen

The machine displays four programs per screen in the following order of appearance:
 Top four: List of the four most commonly used programs (either preset or programmed), arranged by
frequency of use. On starting up the dryer for the first time the screen displays the first four pre-recorded
programs. As different programs are run, these are displayed in the top four positions.
 Manual program: If the manual program display is enabled and is not used, it will be positioned after the list
of the top four.
 Programs created by the user: List of the created programs. If no programs have yet been created, the
machine displays the preset programs directly.
 Preset programs: List of ten programs preset in the machine's memory.
Running a program
16
Code no. 576074
Rev. nº 03/0418