General Stop; Emergency Stop Button - GIRBAU ED Series Operating And Maintenance Instruction Manual

4.6.3. General Stop

Models ED460, ED660 ED900 and ED1250 only.
Disconnecting the mechanically lockable breaker switch, located at the rear of the machine. COMPLETELY
disconnects the machine from the power supply. Suitable for maintenance procedures and when the machine is
idle for long periods.
Mechanically locking breaker switch
Set the breaker switch at the " 0" position.
Fit a padlock on the bottom opening to prevent the breaker switch being handled by others.

4.6.4. Emergency stop button

Models ED460, ED660 ED900 and ED1250 only. (In ED260 and ED340 models the emergency stop
device is optional).
The machine is fitted with an emergency stop (in accordance to the model) identified by a red button on a yellow
background located on the dryer front. The function of this device is to stop all machine functions immediately
and to KEEP them stopped.
To activate the emergency stop:
Press in the emergency stop button from the front. An audible warning is produced and emergency stop alarm
code appears on the display.
Alarm
NEVER LEAVE THE LINEN INSIDE THE DRYER AFTER A DRYING PROCESS, ESPECIALLY IF THE
TEMPERATURE INSIDE THE MACHINE IS HIGH.
Running a program
To continue the operation:
Press the
Release the emergency stop by making a quarter turn in
the direction of the arrow shown on the button itself.
Press the key or the
key to deactivate the audible warning.
key to turn off the alarm.
23
Code no. 576074
Rev. nº 03/0418