Alarms - GIRBAU ED Series Operating And Maintenance Instruction Manual

10.2. Alarms

To increase safety levels in operating the dryer and to protect both the linen being dried and the machines
components, the microprocessor has the capacity to detect the presence of the most significant malfunctions that
might possibly occur. An audible alert is automatically activated once the alarm is triggered.
Keys involved in the alarm screen
KEY
The occurrence of an alarm automatically causes the heating system to switch off and the cancellation of the
program.
The drum rotation and the exhaust fan continue to work as long as the alarm does not affect the control of these
components.
Once an alarm is detected, press the key
Press the key to cancel the audible alert.
Once the problem that caused the alarm has been solved, press the
CAUTION!
Procedure in the event of an alarm
Any procedure aimed at rectifying the fault provoking an alarm that involves removing the protection covers has
to be performed by the Customer's Technical Assistance Service or by the Authorised Technical Assistance
Service, and never by the user of the machine.
Never carry out an intervention that is not described in this section.
DANGER!
BEFORE COMMENCING ANY PROCEDURE WHICH INVOLVES REMOVING THE PROTECTION COVERS:
 DISCONNECT AND MECHANICALLY LOCK THE MACHINE'S BREAKER SWITCH.
 CLOSE AND MECHANICALLY LOCK THE MANUAL GAS VALVE (machines heated with gas).
 WAIT A MINIMUM OF FIVE MINUTES TO ELIMINATE THE RISK OF ANY RESIDUAL VOLTAGE AND TO
ENSURE THAT THERE ARE NO PARTS IN MOVEMENT.
 CHECK THAT THE TEMPERATURE OF THE MACHINE IS NOT TOO HIGH TO CARRY OUT THE
PROCEDURES SAFELY.
Troubleshooting
FUNCTION
Information on the cause of the alarm
Stopping the alert beep
Cancelling the alarm (if possible)
. The display will show the report corresponding to the alarm.
key. The alarm will be cancelled.
Code no. 576074
Rev. nº 03/0418
42