Program Execution Mode - GIRBAU ED Series Operating And Maintenance Instruction Manual

4. PROGRAM EXECUTION MODE

CAUTION!
THE REGULATIONS FOR SAFETY AT WORK AND ACCIDENT PREVENTION MUST BE METICULOUSLY
FOLLOWED.
DO NOT USE THE MACHINE WITHOUT SUITABLE TRAINING AND EXTENSIVE OPERATING
KNOWLEDGE.
NEVER START OR USE THE MACHINE IF ANY OF THE FOLLOWING ARE MISSING, INCORRECTLY
POSITIONED OR MALFUNCTIONING:
 COVERS (GUARDS) AND PROTECTIVE DEVICES
 SAFETY DEVICES
 CONTROL ELEMENTS.
BEFORE HANDLING THE LINEN INSIDE THE DRYER, WAIT UNTIL THE DRUM HAS COMPLETELY
HALTED.
IF THE LINEN IS AT A HIGH TEMPERATURE, PROTECT HANDS WITH THERMALLY INSULATED
GLOVES.
DANGER!
MECHANICAL RISKS
To avoid the risk of being caught up in the machine's moving parts it is essential for hair to be
tied up and suitable fitted clothing to be worn.
Jewellery must not be worn.
Do not use the machine without all the cover and safety guards correctly in place.
Disconnect the power supply and close the gas supply valves and other sources of heating before
removing any form of protection.
ELECTRICAL RISKS
It is essential for the machine to be connected to external protection (earthed).
HIGH TEMPERATURE RISKS
Do not remove any safety guards without first making sure the machine is cool (<35 ºC / 90 ºF).
Do not put the hands anywhere near the exposed surface of the drum, particularly, the laundry
output area or the heating circuit elements.
Wear heat insulating gloves to protect the hands from the continuous contact with hot laundry.
FIRE RISKS
Lint and soot are highly flammable substances.
It is essential to avoid these building up inside the machine and the exhaust ducting running from
the machine to the outside.
To achieve this, all the places likely to collect lint and soot must be regularly cleaned (e.g.:
covers, exhaust ducting, filter, fan, etc.).
Also keep the area around the machine free from lint and any other inflammable materials or
substances.
Remove the linen from inside the dryer without delay. This will prevent creases in the fabric and
reduce the risk of spontaneous combustion.
Running a program
14
Code no. 576074
Rev. nº 03/0418