Running A Program. Description And Examples Of The Screens - GIRBAU ED Series Operating And Maintenance Instruction Manual

4.3.6. Running a program. Description and examples of the screens

For further information, see comments on the various functions that the dryer executes during the program in
Chapter 5: Edit mode.
During the course of the drying program, a series of informative screens will appear describing the functions that
the dryer is executing. Information about functions is displayed by means of icons.
Two examples of drying programs are shown below:
Example 1: length of the drying stage in accordance with set time.
Example 2: length of the drying stage in accordance with linen moisture level control.
These examples are based on the EASY operating mode.
Example 1: Length of the drying stage in accordance with set time
 Select the desired program using the
(Fig. 4.1).
 Once the program has started, the screen will display
the programmed temperature (Fig. 4.3/A), the internal
temperature of the machine (Fig. 4.3/B), as well as the
heating icon in activation phase (Fig. 4.3/C).
 During the drying stage, the remaining drying time is
displayed (Fig. 4.4/A), and depending on the type of
drying selected, the Autospeed
icon appears (Fig. 4.4/B).
 When the dryer enters the cooling phase the
programmed cooling temperature is displayed (Fig.
4.5/A), the internal temperature of the machine (Fig.
4.5/B), as well as the time remaining until the end of
the cooling phase (Fig. 4.5/A).
Once the cooling stage has ended, the machine informs the user of the end of the drying cycle acoustically and
on screen.
Running a program
and keys. Then press
or speed change
to start the program
02 Polyester
02 Polyester
Cool down
18
Fig. 4.3
Fig. 4.4
Fig. 4.5
Code no. 576074
Rev. nº 03/0418