Information Key - GIRBAU ED Series Operating And Maintenance Instruction Manual

Example 2: Length of the drying stage in accordance with linen moisture level control
For machines with moisture detector only.
 Select the desired program using the
(Fig. 4.1).
 Once the program has started, the screen displays the
programmed temperature (Fig. 4.6/A), the internal
temperature of the machine (Fig. 4.6/B), the heating
icon in activation phase (Fig. 4.6/C), the moisture level
programmed (Fig. 4.6/E) and the time elapsed (Fig.
4.6/D).
 During the drying stage, the drying time elapsed is
displayed (Fig. 4.7/A), and depending on the type of
drying selected, the Autospeed
icon appears (Fig. 4.7/B).
 When the moisture level detected by the dryer is equal to the level programmed, the dryer will enter the
cooling stage and end of the cycle (see Example 1).
DANGER!
ONCE THE PROGRAM HAS ENDED, THE LINEN AND THE INSIDE OF THE DRUM MAY BE AT
A HIGH TEMPERATURE.
PROTECT HANDS WITH HEAT-INSULATED GLOVES.

4.3.7. Information key

The display of the INFO key is subject to the INFO VIEW option being selected in the menu (Section 7.1.2).
If the key is pressed while a program is running, the machine will provide information concerning the
operation of the machine and the content of the program.
Contents of the Information menu:
 Input temperature
 Output temperature
 Moisture
 Drying time limit
 Drying time
 Rotation speed
Electrical power used by the inverter.

Running a program
and keys. Then press
or speed change
to start the program
01 Towels
01 Towels
19
Fig. 4.6
Fig. 4.7
Code no. 576074
Rev. nº 03/0418