Programming Mode Menus; General Observations; Two Operating Modes; Programming A Phase - GIRBAU ED Series Operating And Maintenance Instruction Manual

5.2. Programming mode menus

Map of the contents of the EDIT mode: menus and submenus:

5.3. General observations

When selecting an empty program for programming, the dryer control allows the user to adjust the various
program settings sequentially. Confirming each step of the programming leads automatically to the next option.

5.3.1. Two operating modes

There are two operating modes that can be selected in the options menu of the System Tools mode (Section
7.1.2).
 EASY operation: The default operating mode. An operating mode with easy to use programming. The
contents of the programs consist of a single phase and a final cooling. This allows the majority of fabrics
to be dried.
 PRO operation: A mode that allows program settings to be adjusted in greater detail. It allows the
programming of multiple phases and the final cooling. It allows the drying of fabrics that require a complex
process.
At each step of the programming, the availability is specified for each operating mode.

5.3.2. Programming a phase

Selecting and identifying the program
Functions programmable in EASY mode and PRO mode.
This allows the user to select the number of the program to be created.
 Program number: The dryer will display the numbers of the empty programs.
 Program identification: This allows the user to identify the program by name or alphanumeric code.
Duration of the drying
Functions programmable in EASY mode and PRO mode.
It should be stressed that the selecting the drying time control mode substantially determines the operation of
the dryer.
 Duration control by time. In the programming process the drying time is selected (time in minutes).
Once the drying time has ended, the program moves on to the next phase (PRO mode) or on to the
cooling stage, regardless of the moisture level of the fabrics.
 Duration control by level of moisture. (Only in machines with a moisture sensor option.) In the
programming process the length of the drying stage is selected according to the level of moisture
contained in the fabrics and the time limit for the duration of this process. The level of moisture contained
in the fabrics is constantly monitored.
When the moisture level falls to the programmed level or the set time limit ends, the program moves on to
the next phase (PRO mode) or on to the cooling stage.
Edit mode
Creating a new program
Editing a pre-existing program
Program modification menu
Program copying menu
Program deletion menu
Code no. 576074
Rev. nº 03/0418
26