System Tools Mode; Accessing And Moving Between The Intervention Areas - GIRBAU ED Series Operating And Maintenance Instruction Manual

6. SYSTEM TOOLS MODE

The control system provides a group of tools aimed at preparing, personalising, informing and controlling the
overall operation of the dryer.
Within this group, the tools are grouped into different intervention areas.
 CONFIGURING the system.
 INFORMATION regarding the dryer's features, executed functions and alarms detected by the machine's control
system.
Information on how to manage and use these areas is displayed on the screen in written text.

6.1. Accessing and moving between the intervention areas

The SYSTEM TOOLS mode is accessed from the Main Menu.
Information on how to manage and use these areas is displayed on the screen in
written text.
Use the keys on the control panel to access the different blocks in the TOOLS mode.
Keys for moving between the intervention areas
Horizontal movement
Vertical movement
Save the selected value or setting
Selecting/modifying settings and values
Access to the selected menu or block
Back to higher level
System tools mode
34
Code no. 576074
Rev. nº 03/0418