Checking The Emergency Stop - GIRBAU ED Series Operating And Maintenance Instruction Manual

11.3.2. Checking the emergency stop

CAUTION!
THIS SHOULD BE CARRIED OUT BY QUALIFIED PERSONNEL ONLY.
CHECK THE EMERGENCY STOP ON A WEEKLY BASIS.
Applying the emergency stop device (see section 4.6.4).
Checking procedure:
 Switch on the machine and start a drying program.
 Press the emergency stop button.
 The drum will stop rotating and the heating system will turn off.
 The beep will sound and a warning message will be displayed stating that the Emergency Stop is activated.
 Unlock the Emergency Stop button.
key. The Emergency Stop icon disappears, the beep stops, and the MAIN MENU icons are
 Press the
displayed on the screen.
DANGER!
IF A FUNCTION IS DETECTED THAT IS DIFFERENT FROM THAT DESCRIBED IN THIS SECTION,
DISCONNECT ALL THE MACHINE'S SUPPLY LINES AND CONTACT THE AUTHORISED TECHNICAL
SERVICE URGENTLY.
NEVER USE THE MACHINE WITHOUT A PROPERLY WORKING EMERGENCY STOP DEVICE.
Maintenance
53
Code no. 576074
Rev. nº 03/0418