Creating A New Program - GIRBAU ED Series Operating And Maintenance Instruction Manual

5.4. Creating a new program

Some of the features listed below are only programmable in PRO mode.
 In Edit mode, select the icon for creating a new program
 Select a number for the program and press the
 Enter the name of the program (Fig. 5.2). Use the
key to select the characters. If it is pressed
and held down it will select characters in a descending
order. Move from one digit to another using the
and keys. Pressing and holding down
deletes the character on the left.
 Confirm the name entered with the
 Access to the next screen is only possible if the cursor is
located after the last character.
 Select the type of control for the length of the drying
period (Fig. 5.3):
by time
by final moisture level
 If the length of the drying period has been selected by
time, increase or decrease the length of the drying
period with the
Maximum programmable time: 120 min;
Minimum programmable time: 1 min.
 If the length of the drying period has been selected by
setting the moisture level, select the desired final
moisture level (Fig. 5.5):
damp for ironing
dry
extra-dry
 Select the maximum drying time. Increase or decrease
the time limit for the drying period with the
keys (Fig. 5.6).
Maximum programmable time: 80 min;
Minimum programmable time: 1 min.
key.
and keys (Fig. 5.4).
Edit mode
key.
Drying mode
Drying time
and
Moisture
Time limit
Code no. 576074
Rev. nº 03/0418
29
Fig. 5.2
Fig. 5.3
Fig. 5.4
Fig. 5.5
Fig.5.6