Mop Load Size (Cotton); Mop Load Size (Microfibre) - Miele PW 814 Operating And Installation Instructions

Programme chart
Mops intensive
Fabric
Programme
sequence
Mops first wash
Fabric
Programme
sequence
With the Mops . . . + finish programme the mops are ready to use and already
impregnated with detergent and disinfectant. To achieve this, following washing or
disinfection there is a finishing stage and then a final spin. The desired moisture of the
mops can be varied by programming different spin blocks at the end.
Detergent amounts must be set on site and the standard of disinfection must be checked.
The Finish mops programme is suitable for the subsequent finishing of clean and dry
mops. A disinfecting agent is applied during finishing.
Detergent amounts must be set on site and the standard of disinfection must be checked.

Mop load size (cotton)

Mop 40 cm
size/ 190 g/
weight mop
PW 811 Qty. 58
PW 814 Qty. 74
PW 818 Qty. 95
Useful tip: When using microfibre mops, the load size is higher due to the lower mop
weight.

Mop load size (microfibre)

Mop size/weight
PW 811
PW 814
PW 818
94
90 °C
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Pre-wash 30°C
Main wash 90 °C, Cool down can be selected
3 rinses
Final spin
60 °C / 90 °C
For washing new mops
Main wash 60 °C / 90 °C, Cool down can be
selected
2 rinses
Final spin
50 cm 60 cm
220 g/ 280 g/
mop mop
Qty. 50 Qty. 39
Qty. 64 Qty. 50
Qty. 82 Qty. 64
40 cm
120 g/mop
Qty. 92
Qty. 117
Qty. 150
80 cm 110 cm
360 g/ 510 g/
mop mop
Qty. 31 Qty. 22
Qty. 39 Qty. 27
Qty. 50 Qty. 35
50 cm
170 g/mop
Qty. 65
Qty. 82
Qty. 106
Fill ratio/Load
size
1:10
PW 811 - 11 kg
PW 814 - 14 kg
PW 818 - 18 kg
For number,
see
"Mops per load"
chart
130 cm 160 cm
610 g/ 720 g/
mop mop
Qty. 18 Qty. 15
Qty. 23 Qty. 19
Qty. 30 Qty. 25