Copy Area - Miele PW 814 Operating And Installation Instructions

Copy area

Copy  Programme
Target prog. number: 5
Number of programmes
Enter the target programme number and copy it using the  "Save"

button.
If you wish to copy to a target programme place that is already
occupied by another programme, the security question will appear.
Copy  Programme
Overwrite existing data?
If the storage space available is insufficient to accept the selected
programme, the following message will appear in the display:
Copy  Programme
Insufficient memory
"Insufficient controller memory" will flash in the display.
Press the  "Save" button to overwrite.

The overwriting process is carried out and the screen returns to the
"Copy" sub-menu.
Useful tip: When  is pressed, or if after 30 seconds no button has
been pressed, copying is not carried out and the display returns to
the "Copy" sub-menu.
With this menu option a section from an existing programme can be
copied to another programme. In the target programme, a non-
existent section is added or the existing section is overwritten.
Select the area to be copied.

When this is selected, the display will show the following:
Copy Area

Source programme : 1 Cottons hygiene
Source area : 1 Pre-wash
Press the multifunction selector, select the source programme

number and confirm your selection.
Go to the source area and confirm.

Select the source area Pre-wash, Main wash or Rinse and confirm.

: 1




Programming








125