Programming
11. Dispensing
method
144
The assignment of valves to detergent dispensers is as follows:
Pre-wash compartment
Main wash compartment
Fabric softener compartment
Special application compartment
Direct water intake
WRG inlet valve
The following valves are activated depending on programme blocks:
Programme structure
Pre-wash 1
Pre-wash 2-10
Main wash 1
Main wash 1-10 (with pre-
wash)
Rinse 1
Rinse 1
Rinse 2
Rinse 1
Rinse 2
Rinse 3
Rinse 1
Rinse 2
Rinse 3-9
Rinse 10
– User defined
– No
– 4 of 10 different water valves
Determines how the detergent is dispensed into the machine.
Choose from the following options:
– No
No dispensing
– Amount ml (millilitre)
– Concentration m/l (ml per litre)
Does not appear if Fill type is programmed to "Water level" or "Auto
load adjustment" in programme header.
– Concentration ml/kg (ml per wash load in kg)
Temperature range
Actual temperature
Actual temperature
>Required
KD, K1
WD, W1, KD, K1
KD, K1
WD, KD, K1
KD, K2
WD, W2, KD, K2
KD, K2
KD, WD, W2, K2
KD, K3
WD, KD, K3
KD, K4
KD, WD, K4
KD, K3
WD, KD, K3
KD
KD, WD
KD, K4
KD, WD, K4
KD, K3
WD, KD, K3
KD
KD, WD
KD, K4
KD, WD, K4
KD
KD, WD
KD, K3
KD, WD, K3
Valves
K1, W1
K2, W2
K3
K4
KD, WD
K6
Actual temperature
=Required
=Required
WD, W1, KD, K1
WD, W1
WD, W2, KD, K2
WD, W2
WD, K3
WD, K4
WD, K3
WD
WD, K4
WD, K3
WD
WD, K4
WD
WD, K3