Setting Data; Language Data - Miele PW 814 Operating And Installation Instructions

Setting data

Language data

With this menu option all settings from the Supervisor level (see
"Settings" menu option) can be copied from the controls onto a card.
However, existing settings will only be overwritten following
additional confirmation.
Call up the "Settings" display in the "Data to card" menu option.

Main menu  Data to card
Dispensing
Settings
Select "settings" and press the "START" button.

Then the display will change to the following:
Data to card  Settings
If there was already settings data on the card, the security question
will appear.
Data to card  Settings
Overwrite existing data?
Press the  "Save" button to overwrite the existing data.
Useful tip: When the  button is pressed, or if after 30 seconds no
button has been pressed, overwriting is not carried out and the
display returns to the previous menu.
Profitronic M provides 11 languages as standard. These can be
accessed in the operator level via the menu option "Language".
If an existing language is to be written to a card, select the menu
option "Language". However, existing language data on the card will
only be overwritten following additional confirmation.
Call up the "Language" display in the "Data to card" menu option.

Main menu  Data to card
Settings
Language : english (GB)
Option:
– All available languages in the controls


Programming







169