Problems With The Load Size Indicator - Miele SUPERTRONIC Operating Instructions Manual

Problem solving guide

Problems with the load size indicator

Problem
The display indicates a
<25%
load of or no load
size is indicated when
the drum is full.
The display indicates a
25% 50%
load of ,
100%
or when the drum
is empty.
64
Possible cause
There was already
laundry in the drum
when the washing
machine was switched
on. This has
decalibrated the
sensor from the zero
setting.
The load size sensor
75%
, has been decalibrated
from the zero setting.
Remedy
^ To recalibrate the sensor
to the zero setting:
– Remove the laundry from
the drum and leave the
door open.
– Switch off the washing
machine.
– Switch on the washing
machine.
– In the Settings menu
select Load sensor zero
setting.
– Activate the option.
The sensor will be
recalibrated to the zero
setting.
Rotate the drum once. If the
display still indicates a load
25% 50% 75%
of , ,
recalibrate the sensor to
zero again (see above
section).
100%
or ,