Control Panel; Function Buttons - Miele PW 814 Operating And Installation Instructions

Control panel

112
i
Emergency stop switch
The emergency stop switch puts the machine into a safe state in
the event of danger or in order to prevent danger. The emergency
stop switch must be positioned in such a way that the user can
activate it immediately in an emergency. Caution, the machine is
not disconnected from the electricity supply.
When the hazard has been removed, the switch is released by
turning it clockwise.
When the "START" button is pressed again, the interrupted
programme continues.

Function buttons

 Stop/Finish
The right-hand function button is used as the finish button after a
programme has started.
After pressing the button, the selected programme is stopped. If it is
pressed again, the programme is cancelled.
 Block plus
The corresponding programme block (e.g. Pre-wash) is added to the
programme.
 Starch stop
Press this button if the laundry is to be starched.
 Spin
 Without spin
Press this button if a final spin is not required after the final rinse.
 Settings
 Start time
When this button is pressed before starting the programme,
information about selecting a start time will appear in the display.
 Information
After the progarmme has started, current programme information can
be displayed here.
 Manual control
 Skip
 Back Return to previous display page.
/ Information on next / previous line
 Save
See "Access to supervisor level".
1-999 programmes
 Delete (backwards)
aA change from lower case to upper case