Miele PW 814 Operating And Installation Instructions page 32

Washing
Changes before
starting the
programme
Load
Temperature
32
1 Cottons hygiene
40 °C Pre-wash
90 °C Main wash
+ 

The "" field is highlighted in the display.
Useful tip: The function can be deselected by pressing the button
again.
Useful tip: Press the  "Starch stop" button to starch the laundry.
Useful tip: If you do not want a spin cycle after the final rinse, press
the  "Without spin" button.
If you do not want to make any further changes to the programme:
Press the "START" button.

The wash programme will start.
Changes can be made before the start of the programme, e.g. load,
temperature or spin speed:
The load can be entered manually before the start of the programme.
1 Cottons hygiene
40 °C Pre-wash
90 °C Main wash
+ 

Select the "Load capacity" field by turning the multifunction

selector. Press the multifunction selector to confirm your selection.
Change the load capacity by turning the multifunction selector.

Press the multifunction selector to confirm the value.
Before the programme starts, the temperature can be set in
1 °increments from cold 15 °C to the max. 95 °C.
Select the "Temperature" (40 °C for pre-wash) field by turning the

multifunction selector. Press the multifunction selector to confirm
your selection.
1 Cottons hygiene
40 °C Pre-wash
90 °C Main wash
+ 

Change the temperature by turning the multifunction selector. Press

the multifunction selector to confirm the value.
11,0/11,0 kg
1150 rpm


11,0 /11,0 kg



11,0/11,0 kg


