Hysteresis; Warm Up; Level 1; Water Inlet 1 - Miele PW 814 Operating And Installation Instructions

7. Hysteresis

8 .Warm up

9. Level 1

10. Water inlet 1

Temperature difference between heating switch-on-and switch-off
points.
Choose from the following options:

– Normal (Off 0 °C, On -6 °C)
– Low (Off +3 °C, On 0 °C)
– User defined
+3 °C to –10 °C in 1 °C increments
Heating-up speed, how rapidly the water should heat up.
 Warm up is locked if "No" is programmed in program stage 4.
Heating.
Choose from the following options:

– No
– 1 °C/min to 10 °C/min
Heating is permanently activated as required.
In the programme header, the fill type can be selected between
automatic load adjustment, water level, the water quantity and the
suds ratio. With automatic load adjustment or water level, level 1 can
be adjusted accordingly.
Choose from the following options:

– Water quantity
Setting in 0.5 l increments from 0 l to 999 l.
– Water level
Setting in 2 mm increments from 0 mm to 350 mm.
– Laundry to suds ratio
Setting in 0.5 kg increments from 1:0.0 kg/l to 1:20 kg/l.
Control of water intake valves
Choose from the following options:

– Automatic
With the "automatic" setting the water intake valves are activated
such that the required temperature for the wash cycle is already
reached from the first intake of water by alternately activating cold or
hot water valves.
Programming
143