Mop Load Size (Cotton) - Miele PW 811 Operating And Installation Instructions

Mops intensive
Type of fabric
Program se-
quence
New mops
Type of fabric
Program se-
quence
The Mops . . . + finish program prepares mops ready for use by treating them with clean-
ing agent or disinfectant. This is achieved by adding a finishing step with a final spin after
the washing or disinfecting stage. The level of dampness of the mops can be varied by
programming different spin blocks at the end of the program.
Amounts dispensed must be adjusted on site and the standard of disinfection must be
checked.
The Finish mops program is suitable for the subsequent finishing of clean and dry mops.
A disinfectant solution is added during finishing. .
Dispensing quantities must be adjusted on site and the standard of disinfection must be
checked.

Mop load size (cotton)

Mop 16" /
size 40 cm
7 oz /
190 g/
mop
PW 811 58 pcs.
PW 814 74 pcs.
PW 818 95 pcs.
Tip: When using microfiber mops the load size is higher due to the lower mop weight.
194 °F / 90 °C
Cotton and mixed fiber, viscose, polyester and
microfiber mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Pre-wash 86 °F / 30 °C
Main wash 194 °F / 90 °C, Cool down can be ac-
tivated
3 rinses
Final spin
140 °F / 194 °F - 60 °C / 90 °C
For washing new mops
Main wash 140 °F/194 °F - 60 °C/90 °C, Cool
down can be activated
2 rinses
Final spin
20" / 24" /
50 cm 60 cm
8 oz / 10 oz /
220 g/ 280 g/
mop mop
50 pcs. 39 pcs.
64 pcs. 50 pcs.
82 pcs. 64 pcs.
32" / 42" /
80 cm 110 cm
13 oz / 1lb 2 oz /
360 g/ 510 g/
mop mop
31 pcs. 22 pcs.
39 pcs. 27 pcs.
50 pcs. 35 pcs.
Program chart
Fill ratio/Load
size
1:10
PW 811 - 25 lb
(11 kg)
PW 814 - 30 lb
(14 kg)
PW 818 - 40 lb
(18 kg)
No. pieces
See chart
"Mop load size"
52" / 63" /
130 cm 160 cm
1 lb 8 oz / 1 lb 11 oz
610 g/ / 720 g/
mop mop
18 pcs. 15 pcs.
23 pcs. 19 pcs.
30 pcs. 25 pcs.
89