Deselecting Dispensing; Amount To Be Dispensed; Connecting The Dispenser Pumps - Miele PW 814 Operating And Installation Instructions

Deselecting dispensing

Liquid dispensing can be switched off before the programme starts.
1 Cottons hygiene
2 Cottons universal
3 Cottons intensive

Switch liquid dispensing off manually using the "Dispensing off"

function button.
After the programme has started, no detergent will be dispensed via

the dispenser pumps and the following message (for example) will
be displayed:
2 Cottons hygiene
40 °C Pre-wash
90 °C Main wash
+ 

Amount to be dispensed

Please follow the detergent manufacturer's instructions.
 Danger of injury!
Strong chemical reactions and material damage.
It is particularly important to observe manufacturer's instructions
when using a combination of cleaning agents and special
application products. Products must only be used for applications
approved by the manufacturer to avoid any material damage or the
occurrence of strong chemical reactions. Confirmation must be
sought from the detergent manufacturer that using the agent in the
washing machine will not cause damage.
Useful tip: Correct dosage also depends on the viscosity of the liquid
agent. It should therefore be allowed to settle to room temperature
before being used.

Connecting the dispenser pumps

Connection terminals for 4 time-controlled dispenser pumps, which
can be operated without a multifunction module, are located behind
the cover adjacent to the electrical connection. See enclosed wiring
diagram.
Once the machine has been successfully installed and connected,
refit all the housing parts that were removed.
90
60
60

 
11,0/11,0 kg


Optional modules
°C
°C
°C




47