Mask Programmes - Miele PW 814 Operating And Installation Instructions

Programme chart

Mask programmes

Masks are programmes for washing and disinfecting breathing masks with head straps.
Put the head bands over the masks to protect the visors before loading the machine.

Put each mask into its own protective bag and fasten it.

Remove the masks from the bags after processing.

Spin damp, empty bags using the Spin wash bags programme.

Masks
Load
Programme
sequence
Masks with pre-wash
Load
Programme
sequence
Spin wash bags
Load
Programme
sequence
* The disinfection parameters for chemo-thermal disinfection (temperature, temperature holding time, and dosages) must
be set on site to suit cleaning agents and disinfectants.
To avoid recontamination, the water for the rinse cycles in the disinfection programmes is
not supplied via the detergent dispenser.
Do not wash masks with connections for helmet-mask combinations.
The clasps are likely to scratch visors.
Use a suitable detergent. Observe the manufacturer's instructions.
100
60 °C
Face masks with head straps
Disinfection* 60 °C, 20 min.
4 rinses
60 °C
For heavily soiled masks with head straps
Pre-cleaning 30 °C
Disinfection* 60 °C, 20 min.
4 rinses
Face mask bags
Spin
Fill ratio/Load
size
PW 811 -
10 masks
PW 814 -
13 masks
PW 818 -
15 masks
1:20