Miele PW 814 Operating And Installation Instructions page 141

Block name
1. Block
activation
2. Programme
stop 1
Entering block name
Block programming
Block name :
1. Block activation :

Enter the block name.

Block activation can be determined at the start of all block
programming.
Select from the following options in the display under Block

activation:
– No
Programme block is not carried out
– Permanent
The programme block is a permanent component of the programme
structure and is always carried out.
– Block+
The programme block is only carried out when the + "Block+"
button has been pressed.
Used to stop a current programme.
Choose from the following options:

– No
No programme stop occurs.
– Permanent
A programme stop always occurs at the point programmed.
– Starch stop
– Spin stop
When "Starch stop" or "Spin stop" are selected, a programme stop
only occurs at the point programmed if the relevant button is pressed
at that time.
– Spin and Starch stop
When "Starch stop" or "Spin stop" are selected, a programme stop
only occurs at the point programmed if both the "Starch stop" and
the "Spin stop" buttons are pressed at that time.
 Block parameter
No


Programming


141