Miele PW 814 Operating And Installation Instructions page 164

Programming
Information on
calling up card
content
Locking cards
164
The programme is transferred to the memory in the controls.
Remove the card from the card reader.

Useful tip: The programme is only deleted from the memory when
the programme is finished and the card has been removed from the
card reader.
If the programmes on the card are not suitable for the model of
machine, the following message will appear:
Card contents
Programmes on the card are only suitable
for machine type PW 811.
A card can hold max. 30 programmes consisting of 6 blocks each. If
there is only one programme on it, the Card access operation option
is carried out.
Before the start or after the end of a programme information can be
called up about card content.
Insert a card with data into the card reader and press the far-right

function button at the same time.
Information about card content will appear immediately.
Card contents PW 81x
Programme
14:09 25.3.2015
Content of a card with a programme as shown in the display.
Useful tip: When the card is removed or the  button is pressed
the display returns to normal.
There is the option of locking and unlocking the card using the PC
software.
Useful tip: Data on the card cannot be changed when it is locked.
Insert the card into the card reader.

If there is a locked card in the reader, the following message will
appear for 5 seconds when either menu option "Data to card" or
"Delete card" are selected and confirmed with the multifunction
selector:
Supervisor level  Main menu
Card locked.
Data alteration not possible.


