Dispensing - Miele PW 814 Operating And Installation Instructions

Dispensing

Select "Language on card" and confirm your selection by pressing

the multifunction selector.
The display changes to the following:
Data to control unit
Data to control unit
Overwrite existing data?
If a language was already in the selected position in the controls, the
security question will appear.
Press the  "Save" button to overwrite the existing data.

Useful tip: When the  button is pressed, or if after 30 seconds no
button has been pressed, overwriting is not carried out and the
display returns to the previous menu.
All dispensing data for available programmes in the controls can be
copied onto a card using this option.
However, existing dispensing data will only be overwritten following
additional confirmation. For each programme, dispensing method,
dispensing phase 1, 2 (dispenser pump, dispensing amount and
level) and dispensing stop 1, 2 (yes or no) are listed. When the
dispensed agent is changed, a fast and simple dispensing
adjustment is therefore possible.
Only dispenser pumps that are active are listed.
Select the "Dispensing" menu option.

Data to control unit
Dispensing : 13:40 10.05.15
When the multifunction selector is pressed, the security question will
appear.
Data to control unit
Overwrite existing data?
Press the  "Save" button to confirm.

 Language

 Language

Dispensing

 Dispensing

Programming




171