Washing without dispensing drawer
30
Dispenser calibration
V:
100 ml
t:
Press multifunction button 0/1.
Stop the pump by pressing button 0/1, or the pump will stop
automatically after 60 seconds.
Measure the required amount into the measuring vessel.
Dispenser calibration Dispenser pump 1
V:
100 ml
t:
Enter the amount measured in field "V:".
The throughput P is calculated in ml/min by the controls.
Press the "Save" button.
The measured value is assigned to the pump.
Reattach the hose.
Dispenser pump 1
0
s
P: No
0/1
30 s
P: 200 ml/min
0/1