Miele PW 814 Operating And Installation Instructions page 177

Water inlet 
Dispensing 
Water inlet valves and the water level can be set.
Press the  "Water inlet" button.

Manual control  Water inlet
Valve : KH
Level: 100 mm
Press the multifunction selector to confirm the selection of "Valve".
Manual control  Water inlet
Valve : KH
Level: 100 mm
Turn the multifunction selector to select the relevant valve and press

to confirm your selection.
Manual control  Water inlet
Valve : KH
Level: 100 mm
Turn the multifunction selector to select "Level" and press to

confirm your selection.
Turn the multifunction selector to set the level and press to confirm

your entry.
When the valve and level have been selected, start water intake by

pressing the "START" button.
Useful tip: Water intake stops when the set level is reached or if the
 button is pressed again.
Dispensing valve and amount can be set.
This function can only be selected if "Yes" is programmed in the
Service level dispensing display.
Press the  "Dispensing" function button.

Manual control  Dispensing
Dispenser pump : D1
Dispensing amount :
Press the multifunction selector to confirm the selection of

"Dispenser pump".
100 ml
Programming




177