Programme Chart - Facility Management; Mop Programmes - Miele PW 814 Operating And Installation Instructions

Programme chart

Programme chart - Facility Management

These programmes are suitable for washing, disinfection and conditioning (at different
humidity levels) of cotton mops, blended or microfibre fabric, floor mats, polishing pads
and cleaning cloths used in facility management.
To avoid recontamination, the water for the rinse cycles in the disinfection programmes is
not supplied via the detergent dispenser.

Mop programmes

Avoids coarse soiling in the machine.
Shake out the mops before putting them in the machine.

Mops standard
Fabric
Programme
sequence
Mops standard
+ finish
Fabric
Programme
sequence
Mops thermal
disinfection
Fabric
Programme
sequence
92
60 °C / 90 °C
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Main wash 60 °C/ 90 °C, Cool down can be
selected
2 rinses
Final spin
60 °C / 90 °C
Cotton, viscose, polyester and microfibre mops
Programme sequence as for Mops standard,
then: Finishing agent, damp
or activate block:
Damp, wet, dripping wet
90 °C
Cotton, viscose, polyester and microfibre mops
Pre-spin
Pre-rinse
+ 2nd pre-rinse, optional
Disinfection 90°C, 10 min., Cool down can be
selected
3 rinses
Final spin
Fill ratio/Load
size
1:10
PW 811 - 11 kg
PW 814 - 14 kg
PW 818 - 18 kg
For number,
see
"Mops per load"
chart