Figure 2 Cross-Band Simplex Only Capable Dvrs - Conceptual Diagram - Futurecom P25 Installation & Programming Manual

8M083X25 R14
APX Series P25 Interface
DVRS Installation & Programming Guide – PART I

Figure 2 Cross-Band Simplex Only Capable DVRS - Conceptual Diagram

APX8500 may require interface kit. Please refer to the DVR/VRX1000 Ordering Guide.
NOTE:
The vehicular (side-by-side) mount Cross-Band DVR can be interfaced to a high power
MSU, however, the transmit power of the MSU must be reduced to comply with the
maximum power restrictions described in the RF Safety Booklet 8F083X03, which is
provided with the DVR.
IMPORTANT!
The DVRS is shipped equipped with custom filters tuned to the specified frequency
range provided by the customer. Programming the DVR / MSU to operate on
frequencies outside of the original specified bands may result in intermittent or
complete loss of communications. Frequency changes may require filter retuning
or replacement.
January 2019
Page 24 of 153