Futurecom P25 Installation & Programming Manual page 69

Field Name Options
/ Units
Steering in Yes
Emergency No
Steering Revert Yes
No
UID Translation Yes
No
January 2019
DVRS Installation & Programming Guide – PART II
Description
Default setting is 'No' (Disabled).
When steering in emergency is
Disabled, the DVR suspend
steering until the emergency is
cleared. The DVR disregards the
programmed RX PL/DPL and
repeats all traffic to the System.
If enabled (set to 'Yes') the VR
steering does not change when
emergency has been declared.
Enables ('Yes') or Disables ('No")
MSU revert to the originally
selected zone/channel after the
steering inbound call is complete
and the Steering Hang Timer has
expired.
Enables ('Yes') or Disables ('No")
DVR shall replace the PSU's
source ID and TG with MSU's ID
and MSU's TG
8M083X25 R14
APX Series P25 Interface
Notes
Applicable to Analog DVR Modes
only.
Applicable to Analog DVR Modes
only.
The <Unit ID Translation> feature
is supported on digital DVR
channels only.
Page 69 of 153