Dvr Programming Basics; Installing And Uninstalling The Tweaker Programming Software; Using The Tweaker Programming Software Off-Line; Viewing Dvr Personality Files Off-Line - Futurecom P25 Installation & Programming Manual

DVR Programming Basics

Installing and Uninstalling the Tweaker Programming Software

Operating Windows XP
Systems Windows 7, Windows 10
Processor 400MHz or higher Pentium grade processor
Peripherals CD Drive for software installation
USB Port
If you have older Tweaker version already installed, you can either uninstall it first OR you
can simply install the new Tweaker in a new folder.
Insert the provided USB memory stick and follow the prompts to install the Tweaker
programming software in the desired location on your PC. If the installation does not start
automatically, please open the provided CD and click on the Setup.exe file.
To uninstall Tweaker – go to the Control Panel, Add and Remove Programs, find the
DVRS Tweaker and select the Remove option.

Using the Tweaker Programming Software Off-Line

The Tweaker programming software can be used off-line to review, modify and save new
personality templates (.dpd) files.

Viewing DVR Personality Files Off-Line

Run the Tweaker.
Select File → DPD Files (Templates) → Load DPD File and specify the dpd file location
and name when prompted.

Modifying DVR Personality Files Off-Line

Once a dpd file is successfully opened (as described in the previous section), the dpd
settings are available for reviewing and modification off-line.

Saving DVR Personality Files Off-Line

After editing the personality setting, the dpd file can be saved by selecting File → DPD
Files (Templates) → Save DPD File and specifying a new or the same dpd file name and
location.
January 2019
DVRS Installation & Programming Guide – PART II
8M083X25 R14
APX Series P25 Interface
Page 53 of 153