Viewing The Unit Tag Detail And Faceplate; Viewing Unit Tag Detail - Siemens SIMATIC PCS 7 OSx Operator's Manual

8.12

Viewing the Unit Tag Detail and Faceplate

Viewing Unit Tag
Detail
_ACTREQ SYS
ALARM
_ALARMING SYS
_ARCHIVING SYS
_BATCH SYS
_CHANGE_LOG SYS
_CONFIG SYS
_DATA_BASE SYS
_DATA_XFER SYS
_DIAGNOSTIC SYS
_FO_CIRCUIT SYS
_GENERAL SYS
_H1_COMM SYS
_HT_COLLECT SYS
_HT_DISPLAY SYS
_HT_UPDATE SYS
_LIBRARIAN SYS
OK
Top
8-16 Batch
The unit tag detail enables the operator to monitor the status of a unit.
From the tag detail, an operator can issue commands to a unit if he has the
correct security privilege. To view a unit tag detail, click on
faceplate (Figure 8-12), or follow the steps below
1. Select the
Directory
2. Select
Tag Detail
3. Select the name of a configured unit tag.
4. Select to display the tag detail.
OK
Selection List
Incremental
Single Selection
ACTION REQUEST SYSTEM
ALARMING SYSTEM ALARM
ARCHIVING SYSTEM ALARM
BATCH SYSTEM ALARM
OPERATOR CHANGE LOG SYSTEM
CONFIGURATION SYSTEM ALARM
DATABASE SYSTEM ALARM
REMOTE DATA TRANSFER ALARM
DIAGNOSTICS SYSTEM ALARM
FAILOVER CIRCUIT ALARM
GENERAL SYSTEM ALARM
H1 COMM. SYSTEM ALARM
HT COLLECTION SYSTEM ALARM
HT DISPLAY SYSTEM ALARM
HTU SYSTEM ALARM
LIBRARIAN SYSTEM ALARM
Filter... Next
Cancel Help
Figure 8-13 Displaying Unit Tag Detail
icon in the navigation area.
from the directory.
on a unit
Detail
(Figure 8-13).
SIMATIC PCS 7 OSx 4.1.2 Operator